These instructions change both the Resolution and Color Mode:

1. From the Program Manager, double click on the "Main" icon.
2. From Main, go into Windows Setup. The Display line will indicate the current resolution and color mode to which your computer is set. Before making any changes, please make note of your current setting in case you would like to change the settings back to their original values.
3. To make changes, click on Options and then choose Change System Settings.
4. The display line will allow you to arrow up and down to select a different setting. Please select SVGA 640x480x256 and click OK. A message should appear saying: A driver for this display is already on the system.
5. Select Current and restart Windows.

If the message A driver for this display is already on the system does not appear, the computer will ask for Windows disks in order to install the proper files. Please follow the on-screen directions. If you do not have access to Windows disks or the files are not found after putting in the Windows disks, the computer will not have access to the SVGA 640x480x256 driver that is needed in order to run the program.

Color Note:
If the Mosby product needs to run at higher than 256 colors, select the SVGA 640x480xX (where X= a number higher than 256 that is available from the list. If the list does not provide you with a higher choice, you must keep the settings at 256).

Resolution Note:
If the Mosby product needs to run at 1024x768, select the driver SVGA 1024x768x256 and continue from Step 3 above. If this driver is not listed, however, then your computer may not be compatible with this resolution.

To Change the Color Mode:

1. Click on Start and then go into Settings and select Control Panel.
2. From Control Panel, double click on Display. Inside Display, select the Settings tab.
3. The color palette should be changed to 256 Color. To change the color, use the down arrow key to select 256 color and click OK. If 256 color is not an option then the computer is not compatible with 256 color mode.

Note: If the Mosby Product needs to run at higher than 256 colors, then select Color Palette and choose High Color (16 Bit).

To Change the Resolution Setting:

1. Click on Start and then go into Settings and select Control Panel.
2. From Control Panel, double click on Display. Inside Display, select the Settings tab.
3. The Desktop Area should be set to 640x480 pixels. To make any changes, use the Arrow to scroll to Less, and click OK.

Resolution Note:
If the Mosby Products requires 1024x768 resolution, then scroll to More (1024x768 pixels) in Step 3.